Recovery, Recycling, Evacuation and Recharging for R-134a. Automatic operation means less attention is needed!
Automatic Refrigerant Refill - With this latest advance, you never have to stop
in the middle of a job to change refrigerant tanks. The unit maintains 12 to
15 pounds of refrigerant in an internal vessel, and even signals when it's time
to change the supply tank so no monitoring is needed. Uses a 30 or 50 pound
disposable source tank.
Automatic Air Purge - Eliminates damaging air without any monitoring of gauges
or opening of valves.
Automatic Oil Drain - The unit automatically drains system oil captured during
recovery, and the display reminds you to empty the bottle. Calibrations on the
container clearly show you how much oil needs to be replaced.
Accuracy features eliminate guesswork!
Electronic Scale - The scale is mounted internally for protection and has a
dampening mechanism that protects against impact shocks such as movement over
rough surfaces. The scale weighs recovered refrigerant and charges by weight
for greatest accuracy.
Internal Storage Vessel - Refrigerant is recovered into and charged out of this
vessel, which is permanently mounted to the electronic scale for continuing
reliability.
Internal Manifold - A Robinair exclusive, this block manifold contains all the
solenoids that control refrigerant flow, reducing the possibility of leaking
connections.
Best of all, it's easy to use!
Ergonomic Design - The Cool-Tech 700 cabinet is easy to maneuver between service
bays and to position near the vehicle. With the control panel facing the vehicle
as you move the unit, you can clearly see the best orientation.
Large Gauges - The manifold high and low side gauges are mounted at an angle
that's easy to see from under the hood, and they're a full 4" in diameter.
Alpha-Numeric Display - The scrolling display shows messages so it's clear what
your choices are or what needs to be done. you can select English, French, German
or Spanish, as well as pounds or kilograms.
Features that speed service:
6 CFM vacuum pump for fast, thorough pull-down
Heavy duty compressor pulls from both sides during recovery
Single pass recycling meets SAE specs
Oil injector lets you add system oil in seconds
Specifications:
Voltage: 115V / 60Hz
Container: On-board 30 Ib (14kg) vessel (source tank not included)
Operating Range: 50° to 120° F (11 to 49C)
Recycling Filter-Drier: 43 cu. in. (710 cc) Spin-on type
Pump Free Air Displacement: 6 cfm (142 L/m)
Dimensions: 52" H x 33" W x 20" D (132 cm x 83.8 cm x 50.8 cm)
Weight: 180 Ibs (81.65 kg)